The Low Pressure Solution, The booster pump provides needed pressure.
This model combines the 5-stage filtration system PT-4.0/5 with a booster pump.The booster pump allows the system to run at peak efficiency by providing a pressure of 80psi to the RO membrane.The pump is placed after the first stage sediment filter to reduce wear from sediment. The pump motor operates at 24volts D.C. and is supplied with a step-down transformer which plugs into a standard 110-volt outlet (220 volt available). A pressure switch is located on the line to the storage tank which turns the pump OFF when the tank pressure is 40-psi and ON at 25-psi.
An AUTOFLUSH version is also available. Autoflush prolongs the life of the RO membrane, especially in areas with high TDS, sediment load and hardness. Each time the pump turns on, the autoflush valve opens to permit full flow to the drain for 20-seconds flushing the inside of the membrane of any built up contaminants. This reduces plugging of the membrane and ensures efficient rejection of TDS for a longer period of time. RECOMMENDED FOR WATER OVER 1500 TDS.
Features:
-Auto Shut-off valve (conserves water)
-Flow Restrictor – modified capillary
-Long Reach, Non-airgap Faucet
-Feed water connector – Threaded Inlet Adapter with Metal Ballvalve
-Drain Clamp
-1/4 Inch Flexible Polyethylene Tubing w/JACO Compression Fittings
Stage One
Sediment Filter, 5-Micron Polyspun Cartridge, 2 1/2” dia. x 9 3/4″ long
Stage Two
Activated Carbon Block Filter
5 Micron, 2 1/2” dia. x 9 3/4″ long
Stage Three
Reverse Osmosis Membrane, Filmtec 36 GPD TFC @ 65 PSI Pressure Differential
Stage Four
Post-Filter, In-Line, Granular
Activated Carbon, 2” dia. x 10” long
We recommend changing the filters once every six months with the replacement filter kit FK-101. The reverse osmosis membrane MA-4202 should be changed every year.
Reviews
There are no reviews yet.